Additional insured endorsements: CG 20 10 and CG 20 37
Additional insured status extends a sub's general liability policy to protect another party, such as the GC or owner, for claims caused by the sub's work. ISO's CG 20 10 covers ongoing operations. CG 20 37 covers completed operations. Since the 04 13 editions, coverage is also limited to what the contract requires.
This guide explains how these forms usually work. Your policy and your contract wording control, and state law varies. It is not legal or insurance advice.
What additional insured status is
The named insured is the company that buys the policy. An additional insured is another party the policy also protects, for a defined set of claims. On a construction job the sub is the named insured. The GC, and often the owner, are added as additional insureds on the sub's general liability policy.
The idea is to put the cost of injuries and damage caused by the sub's work on the sub's insurance. Say a passer-by is hurt by Uinta Roofing Co.'s work and sues Granite Peak Builders too. Granite Peak can ask Uinta's insurer to defend and cover it as an additional insured.
The coverage has limits. ISO's construction forms cover the additional insured only for injury or damage caused, in whole or in part, by the sub's acts or omissions, or by the sub's work. If the sub played no part in the loss, the endorsement does not respond.
CG 20 10: ongoing operations
CG 20 10 is titled Additional Insured, Owners, Lessees or Contractors, Scheduled Person or Organization. It covers the parties named in its schedule for liability caused by the sub's ongoing operations for them at the listed location.
It stops when the work stops. The form excludes injury or damage that occurs after all work on the project is complete. It also excludes injury or damage after the sub's part of the work is put to its intended use. The exception is use by another contractor working on the same project.
Older editions worked differently. The 11 85 edition covered liability arising out of "your work", which reached completed operations. Later editions limited CG 20 10 to ongoing operations. That change is why a second form exists.
CG 20 37: completed operations
CG 20 37 is titled Additional Insured, Owners, Lessees or Contractors, Completed Operations. It covers the scheduled parties for injury or damage caused, in whole or in part, by "your work" at the scheduled location. The work must have been done for that party and be included in the products-completed operations hazard. In plain terms, it covers claims that arise after the job is done.
A fictional example. Uinta finishes a roof for Granite Peak in May. The next January, a section fails in a storm and water ruins a tenant's equipment. The tenant sues Granite Peak and Uinta. Granite Peak's claim for additional insured coverage depends on CG 20 37 or an equivalent, because the work was complete. CG 20 10 alone would not respond.
That is why a contract that requires additional insured status should name both forms, or forms at least as broad.
Why edition dates matter
An ISO form number has two parts. CG 20 10 is the form. The last four digits are the edition, as month and year. CG 20 10 04 13 is the April 2013 edition. The wording, and the coverage, can change from one edition to the next.
| Edition | What it means for the additional insured |
|---|---|
| CG 20 10 11 85 | Covered liability arising out of "your work", which reached completed operations. |
| CG 20 10 and CG 20 37, 07 04 | Ongoing and completed operations are in separate forms. Still named in some contract forms, such as the AIA exhibit in our sources. |
| CG 20 10 and CG 20 37, 04 13 | Adds three limits. Coverage applies only to the extent permitted by law. It is no broader than the contract requires. The most the insurer pays is the contract's required amount or the policy limit, whichever is less. |
| 12 19 editions | The 12 19 forms we checked, CG 20 37, CG 20 38, CG 20 39 and CG 20 40, keep the 04 13 limits. Their limits wording refers to the applicable limits of insurance instead of the limits shown in the Declarations. |
"To the extent permitted by law"
The 04 13 and 12 19 editions say the coverage applies only to the extent permitted by law. That ties the endorsement to state anti-indemnity laws. Some states limit how far a construction contract can shift liability for one party's own negligence onto another party, and some of those laws reach insurance requirements too. Two examples:
- Colorado. C.R.S. 13-21-111.5(6) voids a construction agreement provision that requires a person to indemnify, insure or defend another against liability caused by the other's negligence. It still allows a requirement to name the other party as an additional insured for the insuring party's own acts or omissions.
- Texas. Insurance Code Section 151.104 voids a construction contract provision requiring additional insured coverage to the extent it requires coverage that the state's anti-indemnity rules prohibit. The law took effect January 1, 2012, and has exceptions.
State law varies widely. A requirement that works in one state may be void in another. Have a lawyer in the project's state review your insurance clauses.
"Required by the contract"
The 04 13 and 12 19 editions also tie coverage to the contract in two ways. The coverage will not be broader than the contract requires. And the most the insurer will pay for the additional insured is the amount the contract requires or the policy limit, whichever is less.
That puts weight on the contract wording. Suppose the subcontract asks Uinta to name Granite Peak as an additional insured but says nothing about limits or completed operations. Granite Peak may end up arguing about what the contract required. A clause that states the limits and names both ongoing and completed operations leaves less to argue about. So does naming forms at least as broad as CG 20 10 and CG 20 37.
Edition references in contracts matter too. One public university's sample contract is built on an AIA construction manager exhibit. It asks for coverage no less than CG 20 10 07 04 and CG 20 37 07 04, to the extent commercially available. A sub whose carrier writes the 04 13 or 12 19 editions should raise that before signing.
Put this on a prequal form you can send today
The free prequal form generator builds a branded subcontractor prequalification PDF. Add your logo, pick sections, download. It includes an insurance requirements table where you set your own minimums.
Blanket versus scheduled endorsements
CG 20 10 and CG 20 37 are scheduled forms. Each additional insured is named in the schedule. A sub with dozens of GCs would need constant changes. Blanket forms grant status automatically when a written agreement requires it.
| ISO form | Covers | Who qualifies |
|---|---|---|
| CG 20 10 | Ongoing operations | Parties named in the schedule |
| CG 20 37 | Completed operations | Parties named in the schedule |
| CG 20 33 | Ongoing operations | Parties the sub agreed in writing, in a contract with them, to add |
| CG 20 38 | Ongoing operations | The same, plus other parties that contract requires the sub to add |
| CG 20 39 (12 19) | Completed operations | Parties the sub agreed in writing, in a contract with them, to add |
| CG 20 40 (12 19) | Completed operations | The same, plus other parties that contract requires the sub to add |
The difference between the pairs is contract privity. CG 20 33 needs a written contract between the sub and the additional insured. The owner usually has no contract with the sub, so CG 20 33 may not reach the owner. An Insurance Journal article describes a custom home case where the subs' CG 20 33 endorsements did not cover the owner for exactly that reason.
Blanket forms only work with a written agreement. CG 20 38, for example, applies when the sub and the other party have agreed in writing in a contract or agreement. A handshake does not count.
Some public owners refuse certain blanket forms from subs. The City of Sierra Madre, California, does not accept CG 20 33 or CG 20 39 from subcontractors.
CG 20 38 for owners and lenders
CG 20 38 is titled Additional Insured, Owners, Lessees or Contractors, Automatic Status for Other Parties When Required in Written Construction Agreement. It adds two groups as additional insureds:
- Any party the sub performs operations for, when they have agreed in writing that the party be added. On most jobs that is the GC.
- Any other party the sub is required to add under that same contract. This is how the owner, a lender, or others named in the GC's subcontract get covered.
The subcontract has to name those upstream parties. If Granite Peak's subcontract with Uinta requires Uinta to add the owner and the owner's lender, CG 20 38 extends status to them. If the subcontract is silent, it does not.
CG 20 38 covers ongoing operations only. The form says status ends when the sub's operations for that party are completed. The matching blanket form for completed operations is CG 20 40. Both forms exclude injury or damage arising out of professional architectural, engineering or surveying services, which matters on design-build work.
How long completed operations coverage should last
ISO's general liability form covers injury or damage that occurs during the policy period. A roof installed in 2026 that fails in 2030 is a claim for the policy in force in 2030. So the sub has to keep buying coverage, with the additional insured endorsement in place, for years after the job ends.
Sonoma County's contract guide says the important date for a completed operations claim is when the injury or damage occurs. It calls unacceptable any endorsement that limits completed operations coverage to the current policy period.
The contract sets the period. Some contracts name a number of years after completion. Others tie it to the state's statute of repose for construction claims. Utah is one example. Its statute generally requires contract and warranty claims against construction providers to be brought within six years after completion, and other claims within nine years. The details are in the statute, and every state is different.
Ask for a certificate showing completed operations coverage with each renewal for that whole period. One public university's sample contract requires one with the final payment application and at each renewal after that.
How it shows on a certificate
On an ACORD 25, the producer marks the ADDL INSD column on the general liability row. The description box may list form numbers, such as CG 20 10 04 13 and CG 20 37 04 13. The form's own notice says the policy must have additional insured provisions or be endorsed, and that the certificate gives the holder no rights by itself.
Ask for copies of the endorsements. Check the form number and edition, the schedule or blanket wording, and that completed operations are covered. See how to read an ACORD 25. Additional insured requirements usually travel with a waiver of subrogation and primary and non-contributory wording. Our free prequal form builder asks subs for a sample certificate.
FAQ
What is the difference between CG 20 10 and CG 20 37?
CG 20 10 covers the additional insured while the sub's work is ongoing. CG 20 37 covers claims from the sub's completed work. A GC that wants coverage during and after the job needs both, or blanket forms that do the same.
Does a certificate of insurance make the GC an additional insured?
No. The certificate only reports what the policy says. The policy must include an additional insured endorsement or provision. Ask for a copy of it.
What does to the extent permitted by law mean in CG 20 10?
It means the coverage cannot go beyond what state law allows. Some states, such as Colorado and Texas, limit construction contract terms that make one party insure another for that party's own negligence.
Is CG 20 38 broader than CG 20 33?
For upstream parties, yes. CG 20 33 needs a written contract between the sub and the additional insured. CG 20 38 also reaches other parties the sub's contract requires it to add, such as the owner or a lender.
How long should a sub keep completed operations coverage for the GC?
As long as the contract requires. Some contracts name a number of years after completion. Others tie the period to the state's statute of repose. The sub must renew the endorsement each year for that period.
What does the edition date on CG 20 10 mean?
The last four digits show the month and year of the edition. CG 20 10 04 13 is the April 2013 edition. Wording, and coverage, can change between editions.
What to require in your prequal
- Additional insured endorsements for ongoing and completed operations, with form numbers and editions.
- Whether they are scheduled or blanket, and whether a blanket form reaches parties with no direct contract.
- How long the sub will keep completed operations coverage in place for you.
- The states where the sub works, for anti-indemnity review.
- A subcontract that states the limits, the forms and the period required.
Sources
- City of Jackson, Sample additional insured endorsement. Text of ISO CG 20 10 04 13.
- Dormitory Authority of the State of New York, Sample endorsements. Text of ISO CG 20 10 04 13 and CG 20 37 04 13.
- Independent Insurance Agents of Texas, copies of ISO CG 20 37 12 19, CG 20 38 12 19, CG 20 39 12 19 and CG 20 40 12 19.
- ISO, CG 00 01 04 13, Commercial General Liability Coverage Form, public copy hosted by Cooper & Scully. Coverage A, injury or damage during the policy period.
- Insurance Journal, Additional Insured Endorsements in Construction (June 15, 2015).
- Sonoma County, Additional insured endorsements, contract insurance requirements reference guide.
- City of Sierra Madre, California, Insurance requirements.
- Colorado, C.R.S. 13-21-111.5.
- Texas Legislature, H.B. 2093, enrolled (2011), adding Insurance Code Chapter 151.
- Utah Legislature, Utah Code 78B-2-225.
- University of Maine System, Sample construction manager project manual, which reproduces AIA A133-2019 Exhibit B, Insurance and Bonds.
- ACORD, ACORD 25 (2025/12), as posted by the New York Department of Financial Services.
We can make this easier
PreQualifySubs.com gives every GC one prequal link. Subs fill their profile once and reuse it for every GC. We check licenses, liens, OSHA records, insurance and references against the source, so you see a verified level instead of a stack of PDFs. Free for subs.