PreQualifySubs.com Contact sales
Guides / TRIR and DART calculator

TRIR and DART rate calculator

TRIR is your recordable cases times 200,000, divided by total hours worked. DART uses only cases with days away, restricted work or a job transfer. Both give cases per 100 full-time workers per year. Enter your OSHA 300A counts and hours below to get TRIR, DART and lost-time rates.

Calculate your rates

Use the totals from one year's OSHA Form 300A. The boxes start with the Uinta Roofing Co. example from further down. The math runs in your browser. Nothing you type is sent anywhere.

No hours total? Estimate it

Enter a number of employees to see the estimate.

TRIR
6.86
DART
4.58
LTIR
2.29

A TRIR of 6.86 means about 6.9 recordable cases for every 100 full-time workers over a year.

OSHA asks for hours actually worked. Use the estimate only when you don't have payroll or time records.

The TRIR, DART and LTIR formulas

All three rates use the same formula. Only the cases you count change.

Rate = number of cases × 200,000 ÷ total hours worked by all employees

RateCases counted300A columns
TRIR, total recordable incident rateAll nonfatal recordable casesH + I + J
DART, days away, restricted or transferredCases with days away from work, job restriction or job transferH + I
LTIR, lost-time incident rateUsually cases with days away from workH

The TRIR and DART formulas come from OSHA's recordkeeping forms package and the BLS guide to computing incidence rates. BLS calls TRIR the total recordable cases rate. LTIR is not an OSHA or BLS term. This calculator uses column H, the same cases BLS counts in its rate for cases with days away from work. Some companies define LTIR differently, so check the form you are filling out.

Each case sits in one column only, the most serious outcome. That is why H + I + J never double counts.

Why 200,000 hours

200,000 is the hours 100 employees work in a year at 40 hours a week for 50 weeks. Multiplying by 200,000 and dividing by your hours turns your case count into cases per 100 full-time workers per year.

That puts a 15-person framer and a 900-person general contractor on the same scale. BLS publishes its industry rates on the same base, so your rate and the BLS rate line up.

Worked examples

These companies are fictional.

Uinta Roofing Co., 2025

Uinta's 300A shows 0 deaths, 1 days-away case (H), 1 restricted-work case (I) and 1 other recordable case (J). It worked 87,400 hours.

Wasatch Mechanical LLC, 2025

A plumbing and HVAC sub with 180 employees. Its 300A shows H = 2, I = 1 and J = 2, with 372,000 hours.

Wasatch had more cases than Uinta but a lower rate. It worked more than four times the hours.

Bonneville Glass, two years

A 13-person glazing sub without good time records. It estimates 13 × 2,000 = 26,000 hours.

YearRecordable casesHoursTRIR
20241 (column J, stitches)26,0007.69
2025026,0000.00

One case moved Bonneville's TRIR from 0.00 to 7.69. Neither number says much on its own. With small hour totals, read the counts and hours, and pool several years if you can. The OSHA 300A guide shows a three-year pooled example.

Compare with the BLS rate for your industry

The Bureau of Labor Statistics publishes injury and illness rates by industry each year from its Survey of Occupational Injuries and Illnesses (SOII). We don't print a benchmark here. The right number depends on your industry and the year, so look it up at the source.

  1. Find your NAICS code. It belongs on your 300A. Roofing contractors are 238160.
  2. Open the BLS SOII tables and pick Table 1 for the latest year. When we checked in November 2026, the latest year was 2024.
  3. Find your row. BLS lists detailed industries, such as roofing contractors under 23816.
  4. Compare your TRIR with the total recordable cases column. Compare your DART with the column for cases with days away from work, job restriction or transfer.
  5. Match the years. Compare your 2024 rate with the BLS 2024 rate.

BLS rates are nonfatal and use the 200,000-hour base, so leave deaths out of your TRIR when you compare. BLS notes that rates mean the most when compared with employers doing similar work at a similar size. Its data allows comparison by industry and employer size, with quartiles for some industries.

The BLS Incidence Rate Calculator and Comparison Tool does the comparison for you. You pick a year and an industry and enter your cases and hours.

How GCs use TRIR and DART

Here is how a GC can use the rates when reviewing a sub.

Put this on a prequal form you can send today

The free prequal form generator builds a branded subcontractor prequalification PDF. Add your logo, pick sections, download.

Subs who need a written program for the next prequal can build one with the free OSHA safety program template.

How TRIR and DART differ from EMR

Prequal forms ask for both, because they measure different things.

TRIR and DARTEMR
What it measuresHow often recordable cases happen, per 200,000 hoursYour workers' compensation losses compared with expected losses for employers in your classification
Built fromYour 300 Log and 300APaid and reserved claims, against expected losses based on your exposure
Who calculates itYou, or anyone with your 300ANCCI or a state rating organization, depending on the state
How to read itLower is better. Compare with BLS.1.00 means actual losses matched expected losses. Below 1.00 is better than expected.
Who has oneEvery employer that keeps OSHA recordsEmployers that qualify for experience rating. NCCI says qualification is based on premium and varies by state.

The two can disagree. One costly claim can push EMR up while TRIR barely moves. Several cases that needed only stitches raise TRIR but add little in claim costs. Read them together. Our EMR guide explains how the mod is calculated.

Frequently asked questions

What is a good TRIR for a construction subcontractor?

There is no single number. Compare your TRIR with the BLS rate for your NAICS industry in the same year, and look at your trend over three years. Each GC sets its own cutoff, if it uses one, so ask the GC what it uses.

Do deaths count in TRIR?

OSHA's form instructions and BLS count only columns H, I and J of the 300A, which are the nonfatal cases. BLS publishes nonfatal rates, so leave column G out when you compare with BLS. Some prequal forms ask you to include deaths. Say which method you used.

What hours should I use?

Use the hours all employees actually worked during the year. Include overtime, part-time and seasonal workers, and temps you supervise day to day. Leave out vacation, sick leave and holidays. It should be the same number as the hours box on your 300A.

What is the difference between DART and LTIR?

DART counts cases with days away from work, restricted work or a job transfer, which are 300A columns H and I. LTIR usually counts only the days-away cases in column H. LTIR is not an OSHA term, so check how the form you are filling out defines it.

Why does one injury make my TRIR so high?

Small hour totals make rates jump. At 50,000 hours, one recordable case is a TRIR of 4.00. Give GCs your case counts and hours along with the rate, so they can see how many hours are behind it.

Where do I find the BLS rate for my industry?

BLS publishes incidence rates by industry and case type each year from its Survey of Occupational Injuries and Illnesses. Find your NAICS code in Table 1 for the latest year, or use the BLS Incidence Rate Calculator and Comparison Tool.

Is TRIR the same as EMR?

No. TRIR and DART count injury cases per hours worked. EMR is a workers' compensation factor that compares your claim losses with the expected losses for employers in your classification. A sub can have a low TRIR and a high EMR, or the reverse.

Sources

Checked November 15, 2026. This page is not legal, insurance or financial advice.

We can make this easier

PreQualifySubs.com gives every GC one prequal link. Subs fill their profile once and reuse it for every GC. We check licenses, liens, OSHA records, insurance and references against the source, so you see a verified level instead of a stack of PDFs. Free for subs.