PreQualifySubs.com Contact sales
Guides / Safety records

Experience modification rate (EMR)

An experience modification rate (EMR) is a workers' comp multiplier that compares your company's injury claims to what is expected for your size and trade. NCCI or your state rating bureau calculates it from three years of payroll and losses. A 1.0 is average. Below 1.0 lowers your premium. Above 1.0 raises it and can cost you bids.

What an EMR is

An experience modification rate is a multiplier your workers' comp carrier applies to your premium. NCCI calls it the experience rating modification factor. Most people say "the mod" or "e-mod." In California you will also hear X-Mod.

Premium starts with a rate for each job class, charged per $100 of payroll. Roofing has a higher rate than clerical work because it has more potential for injuries. That rate is an average for the whole class. The mod adjusts it for your own claim history.

Losses lower than expected for your size and classes earn a credit mod below 1.0. Higher losses earn a debit mod above 1.0. NCCI describes a 1.20 as a prediction that your future losses will be 20% worse than the average employer in your class.

Under NCCI's plan, experience rating is mandatory for every employer that meets the state's premium eligibility rules. The mod changes what you pay for workers' comp. It is also a number GCs and owners ask for in prequalification.

Who calculates your EMR

Your carrier does not set your mod. Carriers report payroll and claims to a rating organization, which calculates the mod. NCCI, the National Council on Compensation Insurance, does this in most states. Several states have their own bureau. NCCI's guide to experience rating sorts them like this:

StatesWho produces the modHow it works
Most statesNCCINCCI's Experience Rating Plan applies. NCCI issues the mod.
Indiana, Massachusetts, North CarolinaState bureau (ICRB, WCRIBMA, NCRB)NCCI's plan applies. The bureau rates employers that work only in that state.
Minnesota, New York, WisconsinState bureau (MWCIA, NYCIRB, WCRB)The bureau rates in-state employers. Employers that also work in another participating state get NCCI's interstate mod.
California, Delaware, Michigan, New Jersey, PennsylvaniaState bureau (WCIRB, DCRB, CAOM, NJCRIB, PCRB)NCCI's plan does not apply. The bureau issues a separate mod under its own rules.
North Dakota, Ohio, Washington, WyomingState fundThese are monopolistic states. The state fund runs its own plan and rates.

Work in two or more states that use NCCI's plan and NCCI issues one interstate mod. Work in only one and you get an intrastate mod. Work in an NCCI state and a state like Pennsylvania and you get two separate mods.

Rating values such as the split point, weight and ballast differ by state and change every year. Treat any rating value on this page as an example unless a named source backs it.

What an EMR of 1.0 means

A mod of 1.00 is called unity. It means your losses are in line with what the plan expects for your size and classes. Experience rating does not raise or lower your premium.

The mod is a straight multiplier. NCCI's own example uses $100,000 of premium before the mod.

ModPremium before modPremium after modEffect
0.75$100,000$75,00025% credit
1.00$100,000$100,000No change
1.25$100,000$125,00025% debit

A 1.00 does not always mean average losses. NCCI also assigns 1.00 when an employer is not eligible for experience rating, does not have enough data, is a new business, or could not provide data after an ownership change. When a sub reports 1.00, ask whether it is a calculated mod or a unity mod because the company is not rated.

The experience period

The mod uses about three years of payroll and losses. It skips the most recent year. That year is left out because carriers have not reported it yet when the mod is calculated.

Under NCCI's plan, a policy is in the experience period if it started no less than 21 months and no more than 57 months before the rating effective date. Carriers do not have to report a policy's data until 18 months after the policy starts. NCCI generally calculates the mod 60 to 90 days before the rating effective date.

For an employer that renews every January 1, it works out like this.

Rating effective datePolicy years usedNot used yet
January 1, 20252021, 2022, 20232024
January 1, 20262022, 2023, 20242025
January 1, 20272023, 2024, 20252026

Two things follow. A claim stays in your mod for three ratings in a row. And safety work you do this year won't show up for about two years. Short-term policies or changed policy dates can shorten or stretch the period. NCCI's guide gives a range from under 12 months to 45 months of data.

How the EMR is calculated

The calculation compares actual losses to expected losses. It splits each into two layers and weights them differently.

Expected losses

Each class code has an expected loss rate (ELR) per $100 of payroll. ELR times payroll divided by 100 gives expected losses. Each class line also has a discount ratio (D-ratio), the share of expected losses that should fall below the split point. Expected losses times the D-ratio gives expected primary losses. The rest are expected excess losses.

Actual losses

Actual losses are the incurred amounts on your claims, meaning what has been paid plus the reserve for what the carrier still expects to pay. An open claim counts at its full reserve. Indemnity and medical are combined into one number per claim.

Primary losses, excess losses and the split point

Each claim is split at a dollar amount called the split point. The part up to the split point is the primary loss. The part above it is the excess loss. A claim under the split point is all primary.

Primary losses count in full. Excess losses count only in part. NCCI's plan gives more weight to how often you have claims than to how big they are. Many small claims predict more claims. One large claim is more likely to be bad luck.

NCCI used one countrywide split point for years. Its 2022 filing listed it at $18,500. NCCI then moved to a split point for each state, set so that about 40% of expected losses are primary. The change rolled out state by state, starting with ratings tied to rate filings effective on or after November 1, 2023. Texas, for example, approved $16,500 for ratings on or after July 1, 2024. NCCI expects to update each state's split point with that state's annual loss cost or rate filing. Ask your agent for your state's current value.

Accident limits

Very large claims are capped before they enter the formula. Each state sets a per-claim accident limit. For an accident that injures two or more people, NCCI's limit is twice that. Anything above the cap is left out.

Weight and ballast

Both come from state tables keyed to your expected losses and updated with each state's annual filing. NCCI's 2022 filing recalibrated the credibility parameters behind them for the first time in over two decades.

Medical-only claims and the ERA discount

A medical-only claim pays for treatment but no lost wages. Most NCCI states have approved the Experience Rating Adjustment (ERA), which counts only 30% of a medical-only claim, both primary and excess. NCCI says ERA also reduces the incentive to pay medical-only claims without reporting them.

The formula

Mod = (Ap + W × Ae + (1 − W) × Ee + B) ÷ (E + B)

  • Ap is actual primary losses. Ae is actual excess losses.
  • E is total expected losses. Ee is expected excess losses, which is E minus expected primary losses.
  • W is the weight. B is the ballast.

NCCI's worksheet shows the same math in a different order. It calls (1 − W) × Ee + B the stabilizing value and adds it to both sides.

A worked example

Uinta Roofing Co. is a fictional roofing subcontractor in an NCCI state. Its mod is effective January 1, 2026, so the experience period is its 2022, 2023 and 2024 policies. The rating values below are made up for illustration. Real ones depend on the state, the year and the company's size.

Illustrative rating valueAmount
Expected losses (E)$80,000
Expected primary losses (Ep)$32,000
Expected excess losses (Ee)$48,000
Split point$20,000
Weight (W)0.10
Ballast (B)$30,000
Medical-only claimsERA applies, 30% counts

Uinta had six claims in the experience period.

Policy yearClaimTypeIncurredPrimary usedExcess used
2022Fall from ladder, broken wristLost time$45,000$20,000$25,000
2022Hand cut from flashingMedical only$3,000$900$0
2023Shoulder strain carrying bundlesLost time$16,000$16,000$0
2023Debris in eyeMedical only$1,500$450$0
2024Back strainLost time$12,500$12,500$0
2024Burn from torchMedical only$2,500$750$0
Total$80,500$50,600$25,000
  1. Split each claim. The $45,000 ladder fall puts $20,000 in primary and $25,000 in excess. Every other claim is under the split point, so it is all primary.
  2. Apply ERA to the medical-only claims. The $3,000 cut counts as $900, the $1,500 eye injury as $450 and the $2,500 burn as $750.
  3. Add up. Actual primary losses (Ap) are $50,600. Actual excess losses (Ae) are $25,000.
  4. Find the stabilizing value. $48,000 × (1 − 0.10) + $30,000 = $73,200.
  5. Weight the excess. Actual is 0.10 × $25,000 = $2,500. Expected is 0.10 × $48,000 = $4,800.
  6. Adjusted actual losses are $50,600 + $73,200 + $2,500 = $126,300.
  7. Adjusted expected losses are $32,000 + $73,200 + $4,800 = $110,000.
  8. The mod is $126,300 ÷ $110,000 = 1.148, shown as 1.15.

What the example shows

Frequency versus severity

Granite Peak Builders is a fictional framing contractor. Its illustrative values are $100,000 of expected losses, $40,000 expected primary, a weight of 0.12, ballast of $35,000 and a $20,000 split point. Compare two versions of its record. Both have $60,000 of lost-time losses, well under the $100,000 expected.

One large claimSix small claims
ClaimsOne $60,000 claimSix $10,000 claims
Actual primary (Ap)$20,000$60,000
Actual excess (Ae)$40,000$0
Adjusted actual losses$112,600$147,800
Adjusted expected losses$135,000$135,000
Mod0.831.09

Same dollars, different mods. The company with six claims gets a debit. NCCI's guide makes the same point with ten small losses against one large loss of the same total.

EMR estimator

Enter numbers from your worksheet, or try what-ifs. The defaults are the Uinta example, so the weight and ballast are example values, not your state's. The estimator uses a simplified NCCI formula. It skips accident limits, ERA and state rules, so enter losses after any ERA reduction.

1.15
Estimated mod

A 1.15 is a debit mod. It predicts future losses about 15% worse than the average employer in your classes. It would raise premium about 15%, or about $15,000 on $100,000 of premium before the mod.

Adjusted actual losses $126,300 ÷ adjusted expected losses $110,000.

This is an estimate, not a rating. Your official mod comes only from NCCI or your state rating bureau, using that year's state rating values.

What is a good EMR?

Lower is better. The plan is built around 1.0 as average, so anything under 1.0 means your losses ran better than expected for your size and trade.

There is no single industry cutoff. Each GC and owner sets its own. Some public owners publish theirs.

Owner documentHow it treats EMR
University of California, prequalification evaluation templateEMR must be less than 1.0 for each of the past three premium years. If not, the contractor is not prequalified.
Palomar Community College District, contractor prequalification application (2022 to 2023)Scores the current mod. Under 1.0 earns 5 points. 1.0 to 1.5 earns 3. 1.51 to 2.0 earns 2. Over 2.0 earns 0. A three-year average under 1.0 earns 6 more points.
California Labor Commissioner, model prequalification questionnaire (March 2019)Asks for the EMR for each of the past three premium years. Says the EMR should be stated in a letter from the carrier. Sets no EMR cutoff.

How to read your own number as a sub:

For GCs, read the mod with the company's size in mind. One claim can move a small sub's mod a lot, as the Uinta example shows. Ballast also limits how low a small company's mod can go. Look at the three-year trend and the claims behind it.

EMR versus TRIR and DART

Prequal forms often ask for all three. They measure different things.

EMRTRIRDART rate
What it measuresWorkers' comp claim dollars compared with expectedOSHA-recordable injuries and illnessesRecordable cases with days away, restricted work or job transfer
Who calculates itNCCI or the state bureauThe employerThe employer
DataPayroll and claims reported by carriersOSHA 300 log and hours workedOSHA 300 log and hours worked
PeriodAbout three policy years, ending a year before the rating dateUsually one calendar yearUsually one calendar year
FormulaActual versus expected losses, with weight and ballastRecordable cases × 200,000 ÷ hours workedDART cases × 200,000 ÷ hours worked
Proof to ask forCarrier letter and worksheetOSHA 300A summaryOSHA 300A summary

The 200,000 stands for 100 employees working 40 hours a week for 50 weeks. DART cases are columns H and I of the OSHA 300A summary. An injury is recordable if it leads to death, days away, restricted work or transfer, medical treatment beyond first aid, or loss of consciousness, among other criteria.

TRIR counts cases. EMR counts dollars. One expensive lost-time injury counts once in one year's TRIR, but it stays in the EMR for three ratings. Look at both. See the TRIR and DART calculator and the OSHA 300A guide.

How to lower your EMR

You can't change past claims. You can change the next three years and make sure the data is right. Start with how often people get hurt, since the formula weighs frequency most.

Prevent claims

Control the cost of the claims that happen

Check the data

Be patient. A clean year shows up in your mod about two years later, then stays for three ratings.

Need a written safety program for your next prequal?

Answer about a dozen questions and get a program written for your trade, citing the OSHA standard each section covers. Free.

How to read an EMR worksheet

NCCI's Experience Rating Worksheet has a summary page and one or more detail pages.

A note on "ERM-14"

The worksheet is sometimes called the ERM-14. That number belongs to a different NCCI form, the ERM-14 Request for Ownership Information. For prequal, what you want is the Experience Rating Worksheet and the carrier's mod letter.

The header

The top of each page shows the risk name, risk ID, state, rating effective date and production date. Also check the mod's status.

The detail page

There is one block per policy, with payroll on the left and claims on the right. The claims on a line are not tied to the class code on that line.

ColumnWhat it isWhat to check
CodeClass codeMatches the work your crews do
ELR, D-RatioExpected loss rate per $100 of payroll, and the share expected to be primarySet by the rating organization
PayrollPayroll for that class and policyMatches your audited payroll
Expected Losses, Exp Prim LossesELR × payroll ÷ 100, then times the D-ratioFollows from payroll
Claim DataClaim number. Small claims may be grouped and shown as "NO." with a count.Every claim is yours
IJInjury type. Type 6 is medical only.Medical-only claims carry type 6, so ERA can apply
OFO for open, F for finalOpen claims with large reserves
Act Inc LossesActual incurred losses, indemnity plus medicalValues look current
Act Prim LossesThe part of each claim up to the split pointLarge claims are capped here

The detail page shows medical-only claims at full value. The ERA reduction shows up in the summary totals.

The summary page

BoxNameWhere it comes from
(A)WtWeight from the state table
(C)Exp Excess Losses(D) minus (E)
(D)Expected LossesTotal from the detail pages
(E)Exp Prim LossesTotal from the detail pages
(F)Act Exc Losses(H) minus (I)
(G)BallastFrom the state table
(H)Act Inc LossesTotal actual losses used, after ERA
(I)Act Prim LossesTotal actual primary losses used, after ERA
(J)Actual total(I) + stabilizing value + (A) × (F)
(K)Expected total(E) + stabilizing value + (A) × (C)
Exp ModThe mod(J) ÷ (K)

The stabilizing value is (C) × (1 − (A)) + (G). The bottom row can also show assigned risk surcharge factors such as ARAP. Those mostly apply to assigned risk policies with a debit mod.

Before you send a worksheet to a GC, check that the risk name matches your legal entity, the rating effective date is current, and the states listed match where you work.

What GCs should ask for in prequalification

A number typed into a form is hard to check. Ask for documents.

Set your cutoff in writing before you send the form, and apply it to every sub the same way. Our free prequal form builder has a Safety section that asks for three years of EMR, the agent's letter and OSHA 300A summaries.

FAQ

What is a good EMR for a contractor?

Anything below 1.0 is better than average for your size and trade. There is no single industry cutoff. Some owners require an EMR below 1.0 for each of the last three years. Others score on a sliding scale. Ask each GC or owner what its cutoff is.

What does an EMR of 1.0 mean?

A 1.0 means your losses are in line with what the plan expects for your size and classes, so the mod does not raise or lower your premium. New businesses and employers that are not eligible for experience rating also carry 1.0.

How many years does an EMR cover?

Usually three years of payroll and losses, ending about a year before the rating effective date. A mod effective January 1, 2026 generally uses the policies that started in 2022, 2023 and 2024.

Who calculates my EMR?

NCCI calculates mods in most states. California, Delaware, Michigan, New Jersey and Pennsylvania have their own bureaus and plans. In Indiana, Massachusetts, Minnesota, New York, North Carolina and Wisconsin, the state bureau rates employers that work only in that state. North Dakota, Ohio, Washington and Wyoming use state funds.

Can I calculate my own EMR?

You can estimate it with the formula and estimator on this page, using the numbers on your worksheet. The official mod comes only from NCCI or your state bureau. They use state rating values that change every year.

How long does one claim affect my EMR?

A claim stays in the experience period for three ratings in a row. With January 1 renewals, a claim on a policy that started in 2023 is used in the mods effective in 2025, 2026 and 2027.

Does a medical-only claim hurt my EMR?

Less than a lost-time claim. In states that use NCCI's Experience Rating Adjustment, only 30% of a medical-only claim counts in the mod. It still counts, so report every injury to your carrier.

What is the difference between EMR and TRIR?

EMR is an insurance number built from three years of workers' comp claim dollars. TRIR is a rate of OSHA-recordable injuries and illnesses per 200,000 hours worked, usually for one year. GCs often ask for both.

Sources

We can make this easier

PreQualifySubs.com gives every GC one prequal link. Subs fill their profile once and reuse it for every GC. We check licenses, liens, OSHA records, insurance and references against the source, so you see a verified level instead of a stack of PDFs. Free for subs.